Calage chaine - ضبط سلسلة محرك بنزين بيجو 305 و 304 و 204

An accelerator pedal sensor, also known as an Accelerator Pedal Position sensor (APP), is an essential electronic component in modern vehicles equipped with electronic engine management systems (ECUs). , for Engine Control Unit). Its main role is to measure the position of the accelerator pedal and transmit this information to the ECU. Here's how it generally works: Linear position sensor or potentiometer: Most accelerator pedal sensors use a linear potentiometer, which is a resistive electrical device. When you press the accelerator pedal, the potentiometer changes resistance depending on the position of the pedal. Position measurement: The sensor measures the position of the accelerator pedal in real time. This can be a continuous analog value or a series of discrete values, depending on the sensor design. Information transmission: Accelerator pedal position data is sent to the vehicle's ECU via an electrical signal. The ECU then uses this data to determine how much fuel to inject into the engine and adjust other operating parameters based on the driver's power demand. Redundancy and safety: In many modern vehicles there are often two accelerator pedal sensors for redundancy and safety reasons. This allows the signals from the two sensors to be compared to detect any faults or anomalies, which is essential for ensuring driver safety. If the accelerator pedal sensor fails, the vehicle may enter a failsafe mode, where engine power is limited to prevent failsafe issues. Keeping these sensors in good working order is critical to ensuring proper vehicle operation and driver safety.